Deepleen Insta Solutions

Industrial Fuel Oil is a type of diesel fuel that has flash point greater than 66 deg C & that is mainly used in stationary applications. automotive diesel fuel used mainly in low RPM engines and Equipments. It has also been widely used in certain types of boilers and furnaces as basic fuel.

Transformer Oils are electrical insulating oils produced by distillation of virgin paraffinic and naphthenic crude oils followed by modern technologies involving high pressure hydrogenation and hydro-treatment. All the processes are monitored closely and appropriate Base Oil fractions are selected for further processing. Further processing involves removal of moisture and polar impurities to obtain good electrical properties. The technologies result in products with very low pour point, excellent oxidation stability, cooling characteristics and electrical properties. These properties make them suitable for the most demanding transformer applications.
Applications

The transformer oils are used in Distribution & Power Transformers, Switchgears and Circuit Breakers.

Products Offered

 HGX is an inhibited grade of transformer oil specifically tailored for demanding applications in EHV and UHV Transformers.

GE IEC60296:2012 Uninhibited is an uninhibited oil which is designed to meet Specifications as per IEC 60296:2012.

GA & GAX grades are offered meeting the specifications of ASTM D3487 Type I & II respectively.

Characteristics

The products fully meet the international and national specifications such as IS-335 2018 TYPE I & II { U & I }, IEC 60296, ASTM D 3487, BS 148, JIS, AS, ASTM. The inhibited grades have DBPC as additive, which is part of the approved list of inhibitors as per IEC 60296.

The products are strictly free from PCB, DBDS or any passivator or metal de-activator. They offer excellent oxidation stability with very low acid and sludge formation when tested according to IEC 61125 and ASTM D2440 besides having excellent dielectric strength, resistivity & dissipation factor. The low pour point and low viscosity characteristics of the product enable excellent cooling properties.

A lubricant is a substance introduced to reduce friction between moving surfaces. It may also have the function of transporting foreign particles. The property of reducing friction is known as lubricity. Typically lubricants contain 90% base oil (most often petroleum fractions, called mineral oils) and less than 10% additives.

Types of lubricants

Automotive applications dominate, but other industrial, marine, and metal working applications are also big consumers of lubricants. Although air and other gas-based lubricants are known, e.g., in fluid bearings, liquid and solid lubricants dominate the market, especially the former.

Lubricants are generally composed of a majority of base oil plus a variety of additives to impart desirable characteristics. Although generally lubricants are based on one type of base oil, mixtures of the base oils also are used to meet performance requirements.

The lubricant base oil is generally classified into three categories depending on the prevailing compositions:

• Paraffinic
• Naphthenic
• Aromatic

Application by fluid types

• Automotive - Engine oils {Petrol (Gasoline) engine oils and Diesel engine oils}, Automatic transmission fluid, Gearbox fluids, Brake fluids and Hydraulic fluids
• Tractor (one lubricant for all systems) - Universal Tractor Transmission Oil – UTTO and Super Tractor Oil Universal –
  STOU – includes engine
• Other motors - 2-stroke engine oils
• Industrial - Hydraulic oils, Air Compressor oils, Gas Compressor oils, Gear oils, Bearing and Circulating System oils, Refrigerator Compressor oils and Steam and Gas Turbine oils
• Aviation - Gas Turbine engine oils and Piston engine oils
• Marine - Crosshead Cylinder oils, Crosshead Crankcase oils, Trunk Piston engine oils and Stern Tube lubricants

White Oils are manufactured from highly refined Base Oils and consist of saturated paraffinic and cycloparaffinic hydrocarbons. The refinement process ensures complete removal of aromatics, sulphur and nitrogen compounds. The technologies employed result in products that are highly stable over time besides being hydrophobic, colourless, odourless and tasteless.

Applications

White Mineral Oils are extensively used as bases for pharmaceuticals and personal care products. The inertness of the product offers properties such as good lubricity, smoothness and softness and resistance to moisture in the formulations.

The products are also used in the Polymer processing and plastic industry such as polystyrene, polyolefin and thermoplastic elastomers. The oil controls the melt flow behaviour of the finished polymer besides providing release properties. Very often the oils also impart improvement in physical characteristics of the finished product.

Food grade Mineral Oils can be used for direct food contact applications such as dough divider & dust suppression in grain silos. These oils can also be used for lubricating food handling equipments and impregnating food packaging & wrapping papers.

Products Offered

We offers two grades of White Mineral Oils.

1 grades comply with the requirements as stipulated under NF/USP, British Pharmacopoeia, European Pharmacopoeia and Indian Pharmacopoeia standards. 1 grades can be used for direct food contact applications such as dough divider, release agents, protective coatings & dust suppression in grain silos. These Oils can also be used for lubricating food handling equipments and impregnating food packaging & wrapping papers. These grades find extensive application in manufacture of cosmetic products such as creams and lotions etc.

2 grades represent the Technical White Oils with slightly different test requirements and are developed for applications in polymers, plastic industries and animal feeds besides certain non-critical applications in packaging and food machinery lubrication where minimal food contact is expected.

Grades are available in all viscosity grades starting from 8 cSt @ 40 deg C to 100 cSt @ 40 deg C and with pour points ranging from -5 to -30 deg C.

Characteristics

Grades are certified to be complying with the requirements laid down under US FDA regulations CFR 172.878 governing the direct food additives permitted in food for human consumption and CFR 178.3620 (a) governing the food additives resulting from contact with handling equipments and packages. These grades also meet the specifications as laid out under NF/USP, British Pharmacopoeia, European Pharmacopoeia and Indian Pharmacopoeia standards. The products are processed and packaged as per GMP norms to make them suitable for direct and indirect food contact applications.

Grades are certified to be complying with US FDA regulations CFR 178.3620 (b) and CFR 121.2589 (b). These grades are extensively used in polymer and plastic industries and are tailored with respect to boiling point distribution and viscosity characteristics. The characteristics of the oil impart good plasticization effect on the finished product while ensuring retention of oil within the polymer.

Group II are hydro-cracked base oils. They are produced by undergoing hydro level of saturates and purges out impurities. They have fair to good performance in lubricating properties such as volatility, oxidative stability an crank viscosity and extreme pressure wear. They are defined as having a viscosity index between 80 and 120 while having a level of sulphur lower than 0.03% and are less ransformer oil, ink oil arine oil ndustrial gear oil utomatic transmission fluid hite oil, process oil Gear oil, Axle oil Better oxidation control Enhanced viscosity control iced very close to Group I oils Reduces wear on engine components Results in an extended range before changing lubricants Parameter Color Density at 15°C Kinematic Viscosity at 100°C Kinematic Viscosity at 40°C Viscosity Index Pour Point Flash Point Carbon Residue Sulphur Saturates Aromatics Appearance cracked base oils. They are produced by undergoing hydro level of saturates and purges out impurities. They have fair to good performance in lubricating properties such as volatility, oxidative stability and flash/fire points. They have only fair performance in areas such as pour point, cold crank viscosity and extreme pressure wear. They are defined as having a viscosity index between 80 and 120 while having a level of sulphur lower than 0.03% and are less ransformer oil, ink oil utomatic transmission fluid Better oxidation control and Improved Enhanced viscosity control and Better base iced very close to Group I oils Reduces wear on engine components Results in an extended range before changing lubricants Kinematic Viscosity at 100°C Kinematic Viscosity at 40°C cracked base oils. They are produced by undergoing hydro level of saturates and purges out impurities. They have fair to good performance in lubricating properties such as d flash/fire points. They have only fair performance in areas such as pour point, cold crank viscosity and extreme pressure wear. They are defined as having a viscosity index between 80 and 120 while having a level of sulphur lower than 0.03% and are less Improved NOACK stability Better base number retention Reduces wear on engine components Results in an extended range before changing lubricants Unit - (g/ml (cSt) (cSt) - (°C) (°C) Wt% Wt% Wt% Wt% Visual cracked base oils. They are produced by undergoing hydro level of saturates and purges out impurities. They have fair to good performance in lubricating properties such as d flash/fire points. They have only fair performance in areas such as pour point, cold crank viscosity and extreme pressure wear. They are defined as having a viscosity index between 80 and 120 while having a level of sulphur lower than 0.03% and are less polar with values less than 10 pS/m very low conductivity stability number retention Results in an extended range before changing lubricants Unit ml) (cSt) (cSt) (°C) (°C) Wt% Wt% Wt% Wt% Visual cracked base oils. They are produced by undergoing hydro level of saturates and purges out impurities. They have fair to good performance in lubricating properties such as d flash/fire points. They have only fair performance in areas such as pour point, cold crank viscosity and extreme pressure wear. They are defined as having a viscosity index between 80 and 120 while polar with values less than 10 pS/m very low conductivity number retention Test Method ASTM D 1500 ASTMD ASTMD 445 ASTMD 445 ASTM D2270 ASTM D 97 ASTM D 92 ASTM D 5 ASTMD ASTM D 7419 ASTM D 7419 … Base oil cracked base oils. They are produced by undergoing hydro-processing which increases the level of saturates and purges out impurities. They have fair to good performance in lubricating properties such as d flash/fire points. They have only fair performance in areas such as pour point, cold crank viscosity and extreme pressure wear. 

LIGHT DIESEL OIL (LDO)

The product application is mainly as fuel oil.

Light diesel oil, or LDO, is a blend of components from the distillation process of crude. It is used in engines with an rpm less than 750, such as boilers and furnaces. LDO is also referred to as distillate fuel or marked oil.

Light diesel oil is used as fuels in many applications :

• Boilers
• Furnaces
• Air pre-heaters
• Lower RPM engines
• Lift irrigation pump sets
• Fertilizer plants
• Bunker
• DG set

SPECIFICATION FOR LIGHT DIESEL OIL (LDO) Sl.No. PARAMETER SPECIFICATION STD.METHOD Typical Quality 1 Relative Density @ 15 °C, Kg / m3 Report IS 1448(P: 32) 855 2 Flash Point (PMC), °C 66 Min. IS 1448(P: 21) 74 3 Viscosity, Kinematic @ 40°C, cSt 2.5 to 15.7 Max. IS 1448(P: 25) 5.0 4 Ramsbottom Carbon Residue (RCR) , percent by mass 1.50 Max IS 1448(P: 8) 1.30 5 Copper Strip Corrosion, 3 hrs at 100°C Not Worse than No. 2 IS 1448(P: 15) No.1 6 Water content % by Vol. 1.0 Max. IS 1448(P: 40) <0.05 7 Sediment % by Mass 0.10 Max. IS 1448(P: 30) 0.04 8 Ash % by Mass. 0.02 Max IS 1448(P: 4) 0.01 9 Acidity, Inorganic, mg KOH /gm, NIL IS 1448(P: 2) Nil 10 Sulphur, Total % by Mass 1.8 Max IS 1448(P: 33) & P: 35 1.2 11 Pour Point, °C 12°C for Winter, Max 21°C for Summer, Max IS 1448(P: 10) Minus 3

Petroleum Jellies are homogeneous mixtures of highly refined and hydro-treated hydrocarbons with specially selected waxes, forming ointment like gels, which are nearly odourless with excellent hydrating characteristics. The resulting gels have excellent emollient properties and consistency for formulating with other active ingredients. It ability to offer tailor-made formulations help to offer products meeting customers’ precise and exacting specifications. We offers grades that comply with strict standards of BP, USP, NF, EuP, IP and other pharmacopoeias. Petroleum Jellies are favoured by personal care and pharmaceutical companies as very versatile, safe and economical formulation base.

WHITE PETROLEUM JELLYProduct description

Various grades of Petroleum Jellies catering to pharma & personal care products as well as technical grades for less critical applications and meeting specifications of customers are manufactured.

Physical properties Applications

The Petroleum Jellies are used as an ointment base, protective dressing and soothing applications to skin. These gels offer excellent barrier to moisture and thus prevent moisture loss from skin.  Our Jellies are used in formulating various cosmetic and personal care preparations like hair conditioners, hand cleaners, lip balms, massage creams, moisturizing lotions, and sun care products and in various pharmaceutical applications such as skin protecting ointments, medicated ointments etc.

Products Offered

We offers the following  products:

Ultima White, Snow White, White Petroleum Jelly and Yellow Petroleum Jelly.

These products cater to different market segments and application needs of customers.

Characteristics

Our products are manufactured using highly refined paraffinic white mineral oils and waxes. This ensures the products are as per the pharmacopeia requirements.

Requirements of pharmacopeia (USP, IP and AP) and are manufactured as per the GMP norms.